Professor XRT Subaru STI-04 w/ XRT-GpN Variant ROM w/ LC+AL

2001+ Subaru STI
Post Reply
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Professor XRT Subaru STI-04 w/ XRT-GpN Variant ROM w/ LC+AL

Post by west_minist »

http://www.xtremeracingtuning.com/forum ... f=87&t=315

Info
Owner: Professor
Tyres: 235/45-17
Total Weight: 1614kg

Mods
2006 STI Spec C engine swapped into a 2004 STI Spec C
  • FMIC
  • AVO Wastegate - 15psi set
  • Blitz Boost Controller
  • Perrin Intake
  • Full HKS Turbo-back 3" Exhaust system
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

v6 Low boost setting up to 20psi

Post by west_minist »

The car is running very efficient for a low boost setting. Typical an STI does 242-270+WHP
v6 Low Boost Setting.png
v6 Low Boost Setting.png (68.3 KiB) Viewed 14296 times
v6 Low Boost - Critical stats.png
v6 Low Boost - Critical stats.png (61.31 KiB) Viewed 14296 times
v6 3rd Gear Dynoes SAE - Correct tyres.png
v6 3rd Gear Dynoes SAE - Correct tyres.png (47.59 KiB) Viewed 14296 times
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

XRT Subaru WRX/STi Dominator 1.5XT-R Twinscroll Turbocharger

Post by west_minist »

New Mods Application: Subaru WRX/STi JDM Twin Scroll Turbocharger
Horsepower: 470HP

Specs - http://www.xtremeracingtuning.com/forum ... ?f=8&t=450
  • Garrett Ball bearing CHRA
  • 56.5mm Turbine Wheel
  • 71mm XT Compressor wheel
  • 47lbs per min
  • BPT Twin Scroll Turbine housing
Target AFR = 11.98
IAT = 68C to 50C
Inj Max. Duty = approx. 60%
v10 4th Gear Dyno SAE 29PSI.png
v10 4th Gear Dyno SAE 29PSI.png (22.89 KiB) Viewed 14190 times
Correction Factor set to 1
v11 3rd Gear Dyno SAE 19PSI.png
v11 3rd Gear Dyno SAE 19PSI.png (25.34 KiB) Viewed 14187 times
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

v13 Dynoes

Post by west_minist »

v13 3rd Gear Dyno SAE 24PSI.png
v13 3rd Gear Dyno SAE 24PSI.png (21.8 KiB) Viewed 14168 times
v13 4th Gear Dyno SAE 26PSI.png
v13 4th Gear Dyno SAE 26PSI.png (23.13 KiB) Viewed 14168 times
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

v16 3rd Gear Dyno SAE Boost=25PSI

Post by west_minist »

v16 3rd Gear Dynoes SAE 25PSI.png
v16 3rd Gear Dynoes SAE 25PSI.png (26.56 KiB) Viewed 14021 times
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Re: Professor XRT Subaru STI-04 w/ XRT-GpN Variant ROM w/ LC

Post by west_minist »

XRT-GpN v17 - 3rd Gear Dyno SAE @ 26psi.png
XRT-GpN v17 - 3rd Gear Dyno SAE @ 26psi.png (45.76 KiB) Viewed 13327 times
-------- Original Message --------
Subject: RE: Speed Density
Date: Sun, 27 Apr 2014 12:27:48 +0000
From: Professor
To: Xtreme Racing Tuning

Hi Edward, as usual, you rose to the challenge, thanks for your quick response to my request for tuning my car with the new TMIC etc. While we have not completed the tuning, the car is purring, running smoothly, no bucking. Even at low boost, the response is quite good. I can't wait to do the other minor changes and complete the tuning. I am once more a happy camper, and I am thinking of maybe running D & W on may 25th. Both the Car and Driver feel revitalized. Lol.
Post Reply

Return to “Subaru STI 2.0/2.5”