Graham - 2005 ADM Subaru Liberty 3R 6MT - Tuning

2000-2002 Subaru Outback/Legacy/liberty
2003-2009 Subaru Outback/Legacy/Liberty
2006-2007 Subaru Tribeca
https://en.wikipedia.org/wiki/List_of_S ... _EZ_engine
Post Reply
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Graham - 2005 ADM Subaru Liberty 3R 6MT - Tuning

Post by west_minist »

Info
Owner: Graham - Australia
Rom: D2WD603H
Tyres: 225/45-18
Car Weight: 1490kg
Driver Weight: 85kg
Total Weight:1575kg

Mods
None

All dyno'es are based on RPM.
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Stock Performance

Post by west_minist »

Stock Performance - 2nd & Third Gear.png
Stock Performance - 2nd & Third Gear.png (18.36 KiB) Viewed 19517 times
2nd Gear Dyno
Stock 2nd Gear Dyno IAT=28C.png
Stock 2nd Gear Dyno IAT=28C.png (15.7 KiB) Viewed 19514 times
3rd Gear Dyno
Stock 3rd Gear Dyno IAT=27C.png
Stock 3rd Gear Dyno IAT=27C.png (16.16 KiB) Viewed 19514 times
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

v0 Stats

Post by west_minist »

v0 2nd Gear Dyno IAT=26.5C.png
v0 2nd Gear Dyno IAT=26.5C.png (15.89 KiB) Viewed 19509 times
v0 3rd Gear Dyno IAT=28.5C.png
v0 3rd Gear Dyno IAT=28.5C.png (16.07 KiB) Viewed 19509 times
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

v1 Stats

Post by west_minist »

v1 2nd Gear Dyno IAT=26.5C IAM=1.png
v1 2nd Gear Dyno IAT=26.5C IAM=1.png (16.14 KiB) Viewed 19498 times
v1 3rd Gear Dyno IAT=27.5C IAM=1.png
v1 3rd Gear Dyno IAT=27.5C IAM=1.png (16.4 KiB) Viewed 19498 times
v1 vs v0 3rd Gear Dyno.png
v1 vs v0 3rd Gear Dyno.png (19.2 KiB) Viewed 19498 times
v1 vs Stock 3rd Gear Dyno.png
v1 vs Stock 3rd Gear Dyno.png (19.38 KiB) Viewed 19447 times
MrPotatoHead

Re: Graham - 2005 ADM Subaru Liberty 3R 6MT - Tuning

Post by MrPotatoHead »

This is my car, just posting my thoughts here. Its been a big learning experience for me and for the car, but luckily i usually pick things up pretty quick :). I contacted edward after reading all the good feedback from people that had their cars tuned. I've noticed immediate improvements in throttle response with light applications, and especially with the v1 rom, it feels like it pulls stronger from low rpm. I'm happy with the gains so far, and edward has been very helpful getting me set up!
MrPotatoHead

Re: Graham - 2005 ADM Subaru Liberty 3R 6MT - Tuning

Post by MrPotatoHead »

Up to v3 now. v2 continued the trend from v1, smoothing out the power delivery and keeping it pulling to the (raised) redline. We're on to the fine tuning now, and all is looking good :)
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

v5

Post by west_minist »

Stock IAT=28C vs v5 IAT=24C - 2nd Gear Dynos.png
Stock IAT=28C vs v5 IAT=24C - 2nd Gear Dynos.png (18.44 KiB) Viewed 19447 times
Stock IAT=27.5C vs v5 IAT=24c - 3rd Gear Dynos.png
Stock IAT=27.5C vs v5 IAT=24c - 3rd Gear Dynos.png (19.27 KiB) Viewed 19447 times
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Re: Graham - 2005 ADM Subaru Liberty 3R 6MT - Tuning

Post by west_minist »

Tuning is finish
MrPotatoHead

Re: Graham - 2005 ADM Subaru Liberty 3R 6MT - Tuning

Post by MrPotatoHead »

I've been very happy with all aspects of the service Edward has provided. Considering the time difference he's always been very quick to respond to any questions or updates I've sent. The car now feels much more responsive, more powerful, and more linear especially at the top end. The last 1000rpm is actually useful now! The DBW changes have made it easier for me to drive, as i'm used to a more sensitive throttle. The service came recommended to me, and I would recommend it to others as well.
Post Reply

Return to “Subaru H6 3.0”