Hyper Drag RA 11.8s car on street tires

Post Reply
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Hyper Drag RA 11.8s car on street tires

Post by west_minist »

Compliments to Hyper on this wonderful RA in Tuning

Thank you very much in giving me the opportunity to offer feedback to this car.

Mods
Cosworth AVCS Cams
GT3071R Twin-Scroll Turbo running 23psi with 17.5psi WG Spring
Apexi High Flow Panel Intake Filter (stock intake box)
PE800cc Injectors
Walbro Pump
Exhaust system

Hyper, you can notify on any corrections above.

Real Dyno can be up to 40whp less, but the graphs are very heavily smoothed.

Yellow & Red represents 4th Gear, while Orange and Green represents 3rd gear.

Image
Hydra Drag RA 3th & 4th Gear Dynoes
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Re: Hyper Drag RA 11.6s car on street tires

Post by west_minist »

Same as above, but I added the 2nd gear to the graph.

Looking at the info table and starting from the top, results for 2nd, 3rd and 4th gear respectively.
Attachments
Hyper Drag RA - Dynoes.png
Hyper Drag RA - Dynoes.png (20.57 KiB) Viewed 8571 times
Hyper

Re: Hyper Drag RA 11.6s car on street tires

Post by Hyper »

initially we used Apexi intake system, but it was so terribile we ended up switching back to stock airbox with Apexi panel filter

we also have HKS intake kit (which I honestly think is the best on the market) but no need for it at the moment, as we are still have to dial in other things like injectors and AFR
west_minist
Site Admin
Posts: 1713
Joined: Sun May 20, 2007 11:08 pm
Location: Barbados
Contact:

Re: Hyper Drag RA 11.8s car on street tires

Post by west_minist »

Did you every tried the GT3076?
Post Reply