3" catless turboback
k&n filter
Aquamist 2D water injection system (100% water injection only)
Prodrive 3-port solenoid (will install)
My VF36 has been ported and polished
IC spray has the auto function, all working properly
Walbro 255Lb/Hr
JDM Impreza WRX STi Spec C MY05
TY856WB6JA
3.636 2.375 1.761 1.346 1.062 0.842 3.545 1.000
3.900
DCCD (35:65)
Helical LSD
Hyper GC8 JDM Spec C RA V9 - Russia Tuned
-
- Site Admin
- Posts: 1713
- Joined: Sun May 20, 2007 11:08 pm
- Location: Barbados
- Contact:
-
- Site Admin
- Posts: 1713
- Joined: Sun May 20, 2007 11:08 pm
- Location: Barbados
- Contact:
Re: Hyper GC8 JDM Spec C RA V9 - Russia Tuned
Below is the power to the wheel in the light GC8 body.
- Attachments
-
- Stg2-4 4th Gear Dyno #2 @ IAT=23-17C
- stg2-4 4th gear Dyno #2.png (11.58 KiB) Viewed 6700 times
-
- Stg2-4 4th Gear Dyno #1 @ IAT=29-19C
- stg2-4 4th gear Dyno.png (12.2 KiB) Viewed 6700 times
West_Minist
Subaru Expert Tuner
Subaru Diagnostics & Logging Reviewer
Engine Management Systems Tuner
http://www.xtremeracingtuning.com
info@xtremeracingtuning.com
Facebook | Remote Tuning | XRT
Viciously Tuned, Driven Hard
Subaru Expert Tuner
Subaru Diagnostics & Logging Reviewer
Engine Management Systems Tuner
http://www.xtremeracingtuning.com
info@xtremeracingtuning.com
Facebook | Remote Tuning | XRT
Viciously Tuned, Driven Hard
-
- Site Admin
- Posts: 1713
- Joined: Sun May 20, 2007 11:08 pm
- Location: Barbados
- Contact:
Re: Hyper GC8 JDM Spec C RA V9 - Russia Tuned
At present, the Water injection is faulty and sent for repairs. Noting that, the follow dyno is on the same car, but without water intection. All on the stock ECU, 21psi Wastegate and detuned to run at 22psi.
- Attachments
-
- S2-23 Dyno
- s2-23+.png (11.17 KiB) Viewed 6698 times